The BP2 is a high-performance, DC powered drive for position, velocity, and torque control of brushless and brush motors via CANopen. Drive commissioning is fast and simple using CME 2™ software operating under Windows® and communicating with the BP2 via RS-232. The BP2 operates as a CANopen DS-402 node. Supported modes include: Profile Position-Velocity-Torque, Interpolated Position Mode (PVT), and Homing. Feedback from both incremental and absolute encoders is supported. A multi-mode encoder port functions as an input or output depending on the drive’s basic setup. As an input it takes feedback from a secondary encoder to create a dual-loop position control system or as a master encoder for driving a cam table. As an output, it buffers the digital encoder signals from the motor’s digital encoder and eliminates split cables that would be needed to send the signals to both drive and control system.
7A
14A
14-90 VDC
172.1 x 119.3 x 44.1 mm
18
7
Resolver, Aux encoder/ encoder out
Step/Direction, Analog, PWM
Commercial
CANopen Network Cable 1' (Model: BP2-NC-01)
CANopen Network Cable 10' (Model: BP2-NC-10)
CANopen Network Kit (Model: BP2-NK)
CANopen Network Terminator (Model: BP2-NT)
DB9 Female to RJ45 Adapter Assembly (Model: BP2-CV)
Heat Sink Kit Standard Profile (Model: BP2-HK)
Serial Cable Kit ( 1 per computer ) (to be used with CME2 software only) (Model: SER-CK)
Solder Cup Connector Kit (Model: BP2-CK)
We are always happy to hear from customers. Send a message using the form and we will promptly provide you with a detailed response.